Did you know that cat scratchers are among the most essential furniture that your cat needs? It’s necessary for him but it also does a wonderful job at keeping him from scratching other nice pieces of furniture in your comfy home. Although pre-made cat scratchers are widely available in pet stores or online, it is extremely fun and easy to make one with your own hands. It’s also a enjoyable project to do with your kids on a nice weekend.
To build a cat scratching board all you nee is a little bit of wood, a little bit of sisal rope, and done! Well it’s almost that simple 🙂 let me give you a step by step guide on how to make a cat scratching board.
Step 1Cutting the boards (& painting them) Measure and cut 3 planks that will be used to make the cat scratching board. The thickness of the planks is not indicated but it should be thick enough so your cat’s weight doesn’t bend the plank.
Step 2Now that the boards are ready, it’s important that you choose whether to leave them like that or give them a personal touch. If the wood is not stained you could decide to keep it this way but you can also decide to apply some varnish or paint. If that’s the case, make sure you prepare your board before going into the next step. Whatever you decide, I believe it’s good to use sandpaper to smooth the edges and make sure your cat won’t end up with a splinter in his paws.
Step 3Preparing the scratching board (longest step) Time to prepare the actual scratching board before assembling it to its support and base.Take the sisal rope, the glue and your stapler, things are getting real. Start by stapling the beginning of the sisal rope under the plank.
Step 4Turn the board and use the glue to trace a straight line on the board where the rope will lay on.
Step 5Go ahead and press the rope on the glue and pull as hard a you can to make it tight before rotating the board.
Step 6When the board is turned, staple the sisal a first time close to the edge (1), pull as hard as you can again and staple it next to the other edge (2).
Step 7Make sure you always staple on the same side of the board. This side will be hidden for visual purposes and also because it will prevent your cat from hurting himself on the staples. Keep on rolling! Simply repeat the same process until you are satisfied with the amount of sisal rope disposed on the board (or if you simply run out of it like me :) ). From time to time, apply a line of glue to make sure it holds tight and remains straight. Do not use too much though, the staples should be strong enough except if your beast turns into a big green monster.
Step 8Putting it all togetherNow you should have everything ready to start assembling the 3 elements of our cat scratching board!First assemble the support to the base. I used wood glue + a drill and a few screws to reinforce the structure.
Step 9Now the tricky part is to put the scratching board on top of the support and base planks. You have two options here. Option one is the simplest and has a more rustic finish: don’t worry about it and just nail and glue the scratching board to the rest (just a thin line of glue). Its tricky because the contact area is relatively small. You need to be quite precise here and you might need extra hands to help align it perfectly while fixing the board.
Step 10Option two is trickier but the end result will be a smoother look and a stronger structure: adjust the cutting angle of each board so they perfectly stick and align to each other. It’s easier to understand by looking at the images. The original cut makes the contact points relatively small.By cutting the edges at the right angle, the contact surface is greatly increased and enables to have the best performance in terms of strength of the overall structure (as pictured below).
Step 11When you are done assembling this beauty, let it dry overnight. The glue might leak so make sure to protect the underlying surface. Keep an eye on it when you are just done, you might already see some excess glue that you can easily remove with a cloth.