Make your own drawer knobs and statement rings with this simple tutorial using Glaze Coat and your favorite silicone mold. A quick trip to the hardware store and you’ll have everything you need to makeover your dresser and to make some awesome jewelry!
Glitter Filled Knobs and Rings
| Difficulty | Cost | Time | Age | Person | Event |
|---|---|---|---|---|---|
|
Easy
|
$0 or Free
|
30 Minutes
|
-- | -- | -- |
Inspired From:
You Will Need...
- YOU'LL NEED
- Famowood Glaze Coat
- Screws and nuts
- Adjustable hose clamps
- Buttons, glitter, beads and Confetti
- Craft knife
- Cardboard
- Plastic cups
- Silicone mold
Step by Step Instructions
Step 1
Cut your cardboard in squares
Cut out section of the cardboard so you can slip on the hose clamp just under the screw
*Make sure it’s secure
Cut small holes in the center of the cardboard squares for the screws
Step 2
Mix equal parts of the Glaze Coat for 5 minutes
Pour 1/4″ in each mold
Step 3
Fill with your glitter, buttons and confetti
Pour the Glaze Coat almost to the top of the mold, but not quite
If you notice bubbles, blow on top of the filled hearts until they pop
Carefully position the head of the screw inside a Glaze Coat filled heart
Position the screw part of the hose clamp inside the heart
Make sure the cardboard does not touch the Glaze Coat
Let dry overnight OUTSIDE under a cardboard box or in part of the house you’re not occupying
Step 4
Carefully remove from the mold, remove the cardboard and sand the edges if you need to.
Leave a Reply