Turn two matching lampshades into a pretty pendant lamp to match any room!
Step 11. & 2. Carefully roll the lampshade on the butcher paper (while tracing the edges with a pencil) to create the pattern and cut out 3. Pin and cut on folded fabric 4. & 5. Spray the lampshade with E-6000 Spray Adhesive and press the fabric to the shade 6. Hot glue the edge of the fabric down *use very little hot glue for this 7. Match the fabric seams and glue the shades together with E-6000 Glue *don't use hot glue because the heat of the bulbs may cause your glue to melt 8. . Hot glue the 1/2" bias trim around the side to cover the seams, center and edges of the pendant 9. Fold the end of the bias over 1/4" to give a clean finish