Quick & easy to make printable Christmas candy bar wrappers.
I created these labels as a humorous gift for my chocolate loving friends and family. We are all certifiable chocoholics and have NO willpower when it comes to being within 10 feet of chocolate.
I have no doubt that they will shred the wrappers and inhale the chocolate before reading what was on the label.
I’ll most likely receive a ton of photos from all of them, holding their wrappers up next to their innocent chocolate covered faces well before the 25th.
Everyone will love receiving them as a gift. They are perfect for those gift exchanges where you are supposed to keep the budget at $5.00. Buy a 6 pack of candy bars and apply these wrappers and you’ve stayed well within the limit. You can never go wrong giving chocolate as a gift.
Please visit my blog to download the free printable PDF and for step by step instructions with photos on how to wrap them around your candy bars.
Before printing make sure that the “fit to page” selection is NOT selected so they print out the correct size. Load your printer with your cardstock or matte photo paper and print the wrappers. There are 2 wrappers per sheet.
Cut out the candy wrappers with your best “paper” scissors. I’ve accidentally used my good fabric scissors before and ruined them.
Once your wrappers have been cut out turn them over and place them on the table so the white side of the paper is facing you. Before putting the double sided tape on make sure you are taping the top and bottom of the wrappers and not the sides.
Start with the top of the wrapper and pull the paper off the tape. Lay your candy bar on the inside of the wrapper and fold the top portion of the wrapper over about a half inch.
You can look to make sure the wording on the wrapper is aligned where the top front folds over so your words aren’t up too far on the fold. I’ve goofed a few times and it easily pulls up to adjust as long as you don’t press down too hard on the tape.
Once it is aligned where you want it, press down on the wrapper so the tape is adhered well.
Peel the paper from your double sided tape off the bottom side of the wrapper and fold over the candy bar. Align the straight edge of the bottom up with the top and press down to seal.